T-EuroMix

Technical Data Sheet

 

PRODUCT NAME

1K Brushing Topcoat

ISSUE DATE

28/1/2010

PART NUMBER

EM555/EM556

PRODUCT DESCRIPTION

A high solids, 1K Polyurethane alkyd designed for brush application, available in a range of sheen finishes.

It affords excellent protection against harsh weather conditions, atmospheric pollution, road dirt, sharp cleaning agents and mechanical car washes etc.

Properties can be enhanced by the addition of EM417 1K Synthetic Activator, especially durability, and this addition can reduce touch dry time by 10 - 20% dependant on film thickness and curing conditions.

EM555 = Satin Finish
EM556 = Matt Finish

PRODUCT PROPERTIES

For Professional Use Only.
This product was designed for brush application onto large areas. It has been developed to provide a long 'wet edge' and an extended drying time. It may not be suitable for small areas or areas that are due to be returned to service in short time-frames. T-EuroMix Coach Enamel can be used as a quicker drying alternative.

MAXIMUM VOC CONTENT

  • 0.340kgs/ltr

REGULATIONS / COMPLIANCE

  • 2004/42 IIB (D) 420

COLOUR RANGE

Available in a wide colour range including RAL & BS shades.

TECHNICAL INFORMATION

COVERAGE

14 square metres per litre @ 50 microns dft (Theoretical)

FLASHPOINT

31°C

STORAGE

Store between 5°C - 25°C. When not in use, cans must be kept sealed

CLEANING

Ensure surfaces to be coated are dry and free from all traces of contaminants.

SUGGESTED PRIMER / FILLER / SEALER SYSTEMS

  • Anti Corrosive Primer Light Grey

HEALTH AND SAFETY

  • Refer to SDS and tin label prior to use.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

 

APPLICATION METHODS

 BRUSH   

T-EuroMix

MIXING RATIO

RFU























T-EuroMix

VISCOSITY

RFU

 

 

 

T-EuroMix

NUMBER OF COATS

2 coats

 

 

 

T-EuroMix

DRYING TIME

Touch dry
Hard dry
Full dry

4-6hrs @20°C
12hrs @20°C
24hours @20°C



















T-EuroMix

RECOATABILITY / OVERCOATING

After 12 hrs @20°C

 

 

 

T-EuroMix

WET FILM THICKNESS

100 microns

100 microns

 

 

T-EuroMix

DRY FILM THICKNESS

50 microns

50 microns

 

 

This product is supplied ready for use, however Synthetic Thinner EM604 can be used for thinning if required and equipment cleaning. Please note the addition of EM604 thinner will affect VOC levels and compliance.

Related Products

Safety Data Sheet