T-EuroMix

Technical Data Sheet

 

PRODUCT NAME

1K Fleet Poly Topcoat

ISSUE DATE

15/12/2009

PART NUMBER

EM516

PRODUCT DESCRIPTION

A 1K high build, high solids polyurethane based on a unique blend of Polyurethane Alkyds.

Properties can be enhanced by the addition of EM417 1K Synthetic Activator, especially durability, and this addition can reduce touch dry time by 10 - 20% dependant on film thickness and curing conditions.

TECHNICAL PROPERTIES

For hot spray application, heat to a maximum of 70°C.

MAXIMUM VOC CONTENT

  • 0.416kgs/ltr

REGULATIONS / COMPLIANCE

  • 2004/42 IIB (D) 420

COLOUR RANGE

Available in a wide colour range including RAL & BS shades.

TECHNICAL INFORMATION

COVERAGE

10 square metres per litre @ 55 microns dft (Theoretical)

FLASHPOINT

> 30°C

STORAGE

Store between 5°C - 25°C. When not in use, cans must be kept sealed

CLEANING

Ensure surfaces to be coated are dry and free from all traces of contaminants.

SUGGESTED PRIMER / FILLER / SEALER SYSTEMS

  • Anti Corrosive Primer Light Grey

HEALTH AND SAFETY

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

 

APPLICATION METHODS

 COMPLIANT SPRAY GUNPRESSURE POTAIRLESS/AIR-ASSISTEDHOT SPRAY

T-EuroMix

MIXING RATIO

Base
Thinner

5
up to 1

Base
Thinner

5
up to 1

Base
Thinner

5
up to 0.5

RFU





T-EuroMix

THINNER OPTIONS

EM604 
 
 

EM604 
 
 

EM604 
 
 

 
 
 

T-EuroMix

VISCOSITY

30-35 seconds B4 cup

30-35 seconds B4 cup

35-45 seconds B4 cup

25-30 seconds B4 cup

T-EuroMix

SPRAY GUN SETUP

1.6-1.8

1.2-1.4

11-13 thou 40/50°

1.6-1.8

T-EuroMix

NUMBER OF COATS

1 light + 1 full

1 light + 1 full

1 full coat

1 full coat

T-EuroMix

FLASH OFF

20 mins between coats

20 mins between coats

 

 

T-EuroMix

DRYING TIME

Touch dry
Hard dry

2hrs @ 20°C
8hrs @ 20°C

Touch dry
Hard dry

2hrs @ 20°C
8hrs @ 20°C

Touch dry
Hard dry

2hrs @ 20°C
8hrs @ 20°C

Touch dry
Hard dry

2hrs @ 20°C
8hrs @ 20°C

T-EuroMix

RECOATABILITY / OVERCOATING

Min 24 hrs depending on build & temp. Surface should be de-nibbed prior to overcoating.

T-EuroMix

WET FILM THICKNESS

100 microns

100 microns

100 microns

100 microns

T-EuroMix

DRY FILM THICKNESS

55 microns

55 microns

55 microns

65 microns

Related Products

Safety Data Sheet