T-EuroMix

Technical Data Sheet

 

PRODUCT NAME

Direct2 1CF 40%

ISSUE DATE

15/12/2009

PART NUMBER

EM509

PRODUCT DESCRIPTION

A high quality, single coat finish achieving a 40% gloss level. It offers superb corrosion resistance, excellent build and fast drying properties even in poor conditions.

MAXIMUM VOC CONTENT

  • 0.362kgs/ltr

REGULATIONS / COMPLIANCE

  • PG6/23 11

COLOUR RANGE

Available in a wide colour range including RAL & BS shades.

TECHNICAL INFORMATION

COVERAGE

5 - 6 square metres per litre @ 110 microns dft (Theoretical)

FLASHPOINT

26°C

STORAGE

Store between 5°C - 25°C. When not in use, cans must be kept sealed

CLEANING

Ensure surfaces to be coated are dry and free from all traces of contaminants.

HEALTH AND SAFETY

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

 

APPLICATION METHODS

 AIRLESS/AIR-ASSISTEDPRESSURE POTCOMPLIANT SPRAY GUN 

T-EuroMix

MIXING RATIO

RFU





RFU





Base
Thinner

1
10 - 20%







T-EuroMix

THINNER OPTIONS

 
 
 

 
 
 

EM606 
 
 

 
 
 

T-EuroMix

VISCOSITY

RFU

RFU

50 - 65 seconds B4 cup

 

T-EuroMix

SPRAY GUN SETUP

13-15thou 40/50°

2.0

1.6 - 2.0

 

T-EuroMix

NUMBER OF COATS

1 full coat

1 full coat

2 full coats

 

T-EuroMix

FLASH OFF

15 minutes between coats

15 minutes between coats

15 minutes between coats

 

T-EuroMix

DRYING TIME

Touch dry
Hard dry

30mins @ 20°C
6hrs @ 20°C

Touch dry
Hard dry

30mins @ 20°C
6hrs @ 20°C

Touch dry
Hard dry

30mins @ 20°C
6hrs @ 20°C







T-EuroMix

RECOATABILITY / OVERCOATING

Min 1 hour @ 20°C

Min 1 hour @ 20°C

Min 1 hour @ 20°C

 

T-EuroMix

POT LIFE

n/a

n/a

n/a

 

T-EuroMix

WET FILM THICKNESS

150 microns

150 microns

60 microns

 

T-EuroMix

DRY FILM THICKNESS

110 microns

110 microns

35 microns

 

This product is supplied ready for use, however XYL Synthetic Thinner EM606 can be used for thinning if required and equipment cleaning. Please note the addition of EM606 thinner will affect VOC levels and compliance.

Related Products

Safety Data Sheet